EV Charger Installation Services | Working Hours: 24/7 | (437) 218-8177 | 4548 Dufferin St #111, Toronto

ev-charger-installation-company-in-toronto-on.jpg

Delta Charger Installation

Global Power Electronics. Local Expert Installation.

Delta isn't a startup; they are a global giant in power management. If you chose a Delta AC MAX or a DC Wallbox, you prioritized reliability and industrial engineering over flashy marketing.

But industrial equipment requires an industrial-grade installation.

A Delta charger is not "plug and play." It requires precise internal configuration, specific torque settings, and network integration.

We are your certified Delta partner. Whether you are a homeowner installing an AC MAX or a business deploying a fleet of DC chargers, we handle the high-voltage wiring, the ESA Permits, and the software commissioning that brings the system to life.

Get Your Delta Quote

Installing the Delta AC MAX (Home & Business)

The AC MAX is a compact powerhouse (up to 11kW/48A), but it must be configured physically before it is powered on.

The DIP Switch Configuration

Inside the unit, there is a bank of tiny switches (Pins 4-6) that control the maximum current output.

The Risk: If your installer leaves these on the default setting while connecting to a smaller breaker, you risk tripping the circuit or overheating the wire.

Our Process: We calculate your available load and physically set the switches (e.g., 32A, 40A, or 48A) to match your panel’s capacity perfectly.

Torx Security & Sealing

Delta uses specific Torx T20 and T30 security screws to seal the unit.

Weatherproofing: The unit is rated IP55 (dust and water jet resistant). We use the correct tools to ensure the rubber seals are compressed evenly, keeping Canadian winter moisture out of the electronics.

ev-technician-installaing-charger.jpg

Commercial & Fleet: DC Fast Charging

Delta is a leader in DC Wallbox (25kW) and commercial charging. This is complex infrastructure.

commercial-ev-charger-installation-in-toronto-on.jpg
  • OCPP Integration: We configure the Open Charge Point Protocol (OCPP) settings so you can connect your chargers to a billing network (like ChargeLab or others) to monetize your parking spots.
  • Dry Contacts: The Delta units feature "Dry Contact" inputs. We can wire these to external controls to automatically pause charging during peak building loads, saving you massive amounts on "Demand Charges" from the utility.

Commissioning: Beyond the Wire

Wiring is only half the job. We use the Delta Web Configuration Tool via Bluetooth or Ethernet to finalize the setup.

  • Authorization Mode: We set the unit to "Plug and Charge" for home use or "RFID Authentication" for shared commercial use.
  • Firmware Updates: We ensure the unit is running the latest firmware to prevent bugs and connectivity drops.

Installation Costs

How much does it cost to install a Delta charger?

Residential (AC MAX): Typical hardwired installation ranges from $1,500 to $2,800.

Commercial (DC Wallbox): This requires 480V/600V 3-phase power. Projects typically start at $10,000+ including trenching and civil work.

The Quote: We provide a comprehensive proposal.

panel-upgrades.jpg

Frequently Asked Questions

Can a regular electrician install a Delta charger?
Legally, yes. But do they have the crimping tool for the required wire ferrules? Do they know how to access the Web Configuration Tool via IP address 192.168.123.123 to set up the network? We are EV Specialists. We know the hardware intimately.
What is the cost of Delta EV charging station?
The AC MAX hardware typically costs between $1,000 - $1,500. The DC Wallbox (25kW) is significantly more, often $10,000 - $15,000 for the hardware alone. We help you source the right unit for your needs.
How much does it cost to install an EV charging station?
Installation cost depends on the distance from your electrical panel and the complexity of the run (e.g., trenching through a parking lot vs. surface conduit). We provide a flat-rate quote after a site assessment.

Power Your Infrastructure

Get the reliability you paid for. Hire the team that understands the engineering behind the box.

Configure. Connect. Charge.


Get Your Free Quote