EV Charger Installation Services | Working Hours: 24/7 | (437) 218-8177 | 4548 Dufferin St #111, Toronto

ev-charger-installation-company-in-toronto-on.jpg

Kempower Charger Installation

Modular Fast Charging for Fleets and Public Sites.

If you are installing Kempower equipment, you aren't just charging a car; you are building a fueling station. Whether you run a logistics fleet, a bus depot, or a retail plaza, Kempower’s modular system is the gold standard for scalability.

But this isn't a "hang on the wall" job. It requires 600V 3-phase power, inter-cabinet DC cabling, and certified commissioning.

We are your certified commercial partner. We don't just run wires; we execute the entire infrastructure project. From pouring concrete pads for your Satellites to configuring the Dynamic Power Management in the C-Series Power Unit, we ensure your investment delivers maximum uptime.

Get Your Commercial Quote

The Kempower Architecture (Power Unit vs. Satellite)

Kempower is unique because the "brains" are separated from the "plug." We specialize in this split-system installation.

The C-Series Power Unit

This is the central cabinet that converts grid power (AC) to battery power (DC).

Our Job: We install this unit away from the parking spots (often near the transformer) to save space.

The Power: We handle the massive 480V or 600V 3-phase connection required to feed these units.

The S-Series Satellites

These are the slim posts where drivers actually plug in.

Our Job: We trench and run heavy DC cables underground from the Power Unit to the Satellites.

The Benefit: We can install up to 8 satellites per power unit, allowing you to charge your entire fleet simultaneously.

commercial-ev-charger-installation-in-toronto-on.jpg
certified-ev-specialist-toronto.jpg

Why You Need a Certified Installer

Kempower has strict warranty requirements. If an uncertified electrician touches the commissioning, your warranty is void.

Mandatory Training: We have completed the specific Kempower technical training required to open the cabinet and terminate the DC cables.

Software Commissioning: We use the Kempower Commissioning Tool to set up the ChargEye backend. This is critical for billing users or tracking fleet energy usage.

Dynamic Load Balancing: We configure the system to share power intelligently. If four cars plug in, the system automatically distributes the available 200kW (or more) to where it is needed most. A generic electrician won't know how to program this.

Installation Costs

How much will it cost to install a Kempower system? This is a commercial construction project, not a home install. Costs vary wildly based on site conditions.

  • The Scope: Trenching, concrete work, bollard protection, transformer upgrades, and high-voltage wiring.
  • The Estimate: We provide a comprehensive Site Assessment and commercial proposal. Expect projects to start in the tens of thousands, scaling up for larger depots.
ev-chargers-installation-solutions-in-toronto-on.jpg

Frequently Asked Questions

Can I install a Kempower charger myself?
Absolutely not. This is industrial equipment involving lethal DC voltages (up to 1000V). Installation requires a Licensed Electrical Contractor with commercial experience and specific manufacturer certification.
How to use Kempower charger?
For the driver, it’s simple. Plug in and scan an RFID card or use the app. For the fleet manager, we train you on the ChargEye dashboard so you can monitor uptime, error codes, and kWh consumption in real-time.
Can a regular electrician install an EV charger like this?
A residential electrician cannot handle this. They likely lack the tools for DC cable termination and the software access for commissioning. You need an industrial electrical contractor who specializes in EV infrastructure.

Build Your Charging Network

Don't trust your fleet to a generalist. Hire the team that understands the modular power of Kempower.

Plan. Build. Commission.


Get Your Commercial Quote