EV Charger Installation Services | Working Hours: 24/7 | (437) 218-8177 | 4548 Dufferin St #111, Toronto

ev-charger-installation-company-in-toronto-on.jpg

Tesla Charger Installation

Unlock the Full Speed of Your Model 3, Y, S, or X.

You didn't buy a Tesla to wait 24 hours for a charge. If you are using the "Mobile Connector" that came with the car (or plugging into a regular 120V outlet), you are barely adding 6-10km of range per hour.

To experience the real freedom of owning a Tesla, you need a Tesla Wall Connector.

We are your dedicated installation partner. We don't just bolt it to the wall; we configure the internal amperage, handle the Wi-Fi commissioning, and ensure your home’s electrical panel can handle the high-speed load.

Get Your Tesla Quote

Why Hire a Licensed Pro? (Not a Handyman)

A Tesla Wall Connector is a high-performance computer that pushes high voltage. It is not a toaster.

1. The "60 Amp" Requirement

To get the maximum charging speed (approx. 77km/hour), your Wall Connector needs to be on a 60-amp dedicated breaker.

The Risk: Many older Toronto homes can't handle this load. A handyman might install it anyway, melting your wires.

The Expert Fix: We perform a Load Calculation. If your panel is tight, we can dial the charger down (to 40A or 30A) or install EVEMS to keep you safe without a service upgrade.

2. The Software Commissioning

The Gen 3 Wall Connector doesn't just work when you flip the switch. It requires a digital setup.

  • We connect to the unit’s internal SSID.
  • We configure the circuit breaker sizing in the firmware.
  • We connect it to your home Wi-Fi for Over-the-Air (OTA) updates.
panel-upgrades.jpg
ev-chargers-installation-service-toronto.jpg

Which Tesla Charger Do You Have?

We install all versions of Tesla's home charging hardware.

Gen 3 Wall Connector (The Standard)

The white glass-face unit you see everywhere.

  • Top Speed: 48 Amps (11.5 kW).
  • Connector: Proprietary NACS (North American Charging Standard).
  • Best For: All Tesla models.

Universal Wall Connector (The Future)

The new unit with the "Magic Dock."

  • Feature: It has a built-in J1772 adapter.
  • Best For: Households with one Tesla and one non-Tesla (like a Ford or Hyundai). We install these to future-proof your garage.

Our Installation Process

We make it look like it came with the house.

Virtual Assessment: Send us a photo of your panel and garage. We confirm if you have space for a double-pole breaker.

The Wiring: We run heavy-gauge 6 AWG copper wire (or Teck 90 for outdoor runs). We fish wires behind drywall whenever possible for a clean look.

The "Power Share": Have two Teslas? We can install two Wall Connectors on a single circuit and program them to Power Share, so they split the available electricity automatically.

ESA Certification: We file the permit. You get the certificate.

ev-technician-installaing-charger.jpg

Installation Costs

ev-charger-installation-firm-in-toronto-on.jpg

How much does it cost to have someone install a Tesla charger?

In the GTA, a professional installation typically ranges from $1,200 to $2,500 (plus the cost of the charger itself).

The Low End: A simple install right beside the electrical panel.

The High End: A long wire run across a finished basement or trenching to a detached garage.

The Honest Price: We give you a flat rate upfront. Check our full installation cost guide.

Frequently Asked Questions

How much does it cost to install a Tesla charging point?
The hardware (Wall Connector) costs approx $620 CAD (purchased from Tesla). Our labour and materials (wire, conduit, breaker, permit) are separate. Total investment usually lands between $1,800 - $3,000 all-in.
Do you need an electrician to install a Tesla charger?
Legally and practically, yes. You are dealing with 240 volts at high amperage. A mistake can cause an arc fault fire or damage your car's onboard charger. Also, Tesla’s warranty often requires professional installation evidence from a Licensed Electrical Contractor.
How much does it cost to install a 240V outlet?
If you prefer to use the Mobile Connector (the portable cable), we can install a NEMA 14-50 outlet. This costs slightly less than hardwiring but is slower (32 Amps max) and requires a GFCI breaker by code, which adds to the material cost.

Charge at Full Speed

Don't let a slow charger hold you back. Get the professional install your Tesla deserves.

Licensed. Commissioned. Certified.


Get Your Tesla Quote